JTRPG Mixing Tank

Magnetic Agitator Mixing Tank be designed, manufactured and inspected in accordance with the pressure vessel standard(GB150-2011) and the steel welded atmospheric pressure vessel standard(NB/T 47003.1-2009) , strictly meet to GMP certificate requirements.

Detail Description

Full Jacket Magnetic Stirring Tank

JTRPG Mixing Tank be designed, manufactured and inspected in accordance with the pressure vessel standard(GB150-2011) and the steel welded atmospheric pressure vessel standard(NB/T 47003.1-2009) , strictly meet to GMP certificate requirements.
The Mixing Tank adopts Vertical circular tanks, both of top and bottom are standard oval and torispherical head. Transition section in tank using circular arc transition, without dead corner, easy to clean. Single layer, double layer(insulation for tank and bottom head) or Jacket(tank and bottom head have jacket and insulation), equipped with mechanical stirring according to customers’ requirement.

Tank Optional Configuration

The body of Mixing Tank can configure aseptic air filter, thermometer(Digital display or Dial type), PH meter, pressure gauge, steam sterilization hole, sight glasses, sanitary manhole, liquid in-outlet, CIP cleaning ball, liquidometer and Liquid level control system(Bearing module, non-contact ultrasonic, static pressure transmitting device) and so on, also can configure as customers’ requirement.

Application
? Can be used as Storage Tank, mixing tank, temporary Storage Tank, mixing tank, etc., Used in liquid materials’ mixing and storage such as medicine, food, fruit juice beverage, dairy products, seasoning, brewing, beer, pharmaceutical, chemical and biological engineering.

Feature

? Volume:100L~5000L and multiple specification, also can design and manufacture according to customers’ requirement.
? Jacket can pass steam (or hot water), can also pass the cooling water. Jacket has full jacketed、half-pipe coil jacketed, dimple jacketed and plate coils. Jacketed outside covered with insulation, thermal insulation material for rock wool (warm) or PU (cold).
? The connection adopt Tri-clamp, the tanks’ inner layer use 304 or 316L. The inner surface mirror polishing Ra≤0.28μm～0.6μm, outer surface can polishing, wire drawing and sand blasting according to customers’ requirement.
? According to the requirements of production and processing, can design with low heating, cooling, high-speed mixing system, sealing pressure system, vacuum system, measuring system and so on.
? According to different mixing materials and requirements to the mixing effect of the structure of impeller can adjust the turbine type design, paddle, anchor type, frame type, screw conveyor and so on..

Design Parameter

Design pressure	-0.1MPa～0.6MPa

Design temperature	According to customers’ requirement（0℃～160℃）

Material

Liner	304、316L
Jacket	304
Insulation	Rock wool or PU
Feet	304

Connection

In-outlet

Tri-clamp, Flange

Surface Finish

Finish Type	Mechanical polishing, electrolytic polishing, sand blasting, pickling
Polishing precision	Inner surface Ra≤0.3μm， Outer surface Ra≤0.6μm

Normal Model And Main Technical Parameters

Parameters		Model	JTRPG—100	JTRPG—300	JTRPG—600	JTRPG—1000	JTRPG—2000
Effective volume：L			100	300	600	600	2000
Barrel	Diameter：mm		Φ500	Φ800	Φ900	Φ1100	Φ1300
Barrel	Height：mm		500	700	900	1000	1500
Agitator	Power：kW		0.37	0.75	1.1	1.5	2.2
Agitator	RPM：r/min		36～53（傾葉開啟渦輪式）（The design can be adjusted according to customer use condition）
The above-mentioned data is the standard, for reference only. It can customize according to customer's requirements.

PrevStainless steel mixing tank
NextMagnetic Agitator Mixing Tank

Online Enquiry

Welcome to send an online inquiry! If you have any suggestions or questions about our products, you can Email us.[email protected], also feedback through this inquiry; we will reply to you within 24 hours. (Monday to Friday, 9:00-17:30)